How to change listening ip? LAN connections don't work

[d9k]

Hi! I want to change listening ip from 127.0.0.0 to my PC address at LAN (something like 192.168.10.100)
How to achieve that?
Tried Settings -> Option settings -> Core: basic settings -> Allow connections from the LAN.

But devices from my local network (for example from 192.168.10.55) can't connect to this host proxy:

export HTTP_PROXY="192.168.10.100:10808"
export HTTPS_PROXY="192.168.10.100:10808"
curl https://bridges.torproject.org/bridges?transport=obfs4
curl: (7) Failed to connect to 10.0.0.120 port 10808 after 6 ms: Could not connect to server

[d9k]

OK, I upgraded v2RayN and option Local outbound address (SendThrough) appeared, I filled it, restarted application, but it still connections from LAN devices doesn't work.

[d9k]

Also option New port for LAN doesn't work. If I turn it on the left-bottom corner of v2rayN application says LAN:[mixed:10808] but no new port visible in sudo lsof -i | grep xray | grep LISTEN

[d9k]

OK, just did SSH port forwarding

> ssh -R 10808:localhost:10808 -lmyuser 192.168.0.55
export HTTP_PROXY="127.0.0.1:10808"
export HTTPS_PROXY="127.0.0.1:10808"
curl https://bridges.torproject.org/bridges?transport=obfs4
# - works

[netconfiger]

0.0.0.0

[spiritofthenight]

go to Settings -> Full Config Template Setting ->v2ray Full Config Template:

Enable Full Config Template, then paste this into xray config template json:

{
"inbounds":[
{
"port": 10808,
"listen": "0.0.0.0",
"protocol": "socks",
"settings": {
"udp": true
}
}
]
}

then confirm.

then on another PC in your LAN open v2rayn -> Configuration -> Add [SOCKS] - then enter this :

Core Type: Xray
Alias (remarks): Set any name you want, for example: my connection from this PC to my other PC in LAN
Address: enter the PC private ip you want to connect to (for example 192.168.1.106) *tip: use ipconfig on windows or ip -br addr on linux
Port: 10808
leave other fields untouched
Confirm

now you should be able to use your first PC as gateway for your other PC on the same LAN.

if this didnt worked and you still cant get a connection, check out your firewall on second pc and see if incoming 10808 is open for your LAN ip range, if not you should open that incoming port.

I hope this was useful.